deb
Member
Posts: 0
|
Post by deb on Aug 10, 2017 8:48:55 GMT 12
Hi, We are looking for information on what kind of pump is needed to vacuum the bottom of swimming pool area at the end of the season. The swimming pool area is connected to a lake. We are looking for something that would remove debris & not have to go thru the pump. We have to have head pressure to send excess to 4" drain hose. We would appreciate any help. Thank you, Deb
|
|
|
Post by goldiverpng on Sept 2, 2017 17:08:44 GMT 12
Hi Deb,
1-how long is the discharge point you have to move the silage ?
2-how deep is the pond ?
a modified 6" dredge will have plenty of suction to transport send and mud for over 10 mt.
the jet have to be position underwater and can have a extension of 6"hose of 5mt .
please respond with info on 1-2 and we go from there !
Regards,
Lubo
|
|
|
Post by addergran on Sept 9, 2017 12:42:10 GMT 12
Hi, We are looking for information on what kind of pump is needed to vacuum the bottom of swimming pool area at the end of the season. The swimming pool area is connected to a lake. We are looking for something that would remove debris & not have to go thru the pump. We have to have head pressure to send excess to 4" drain hose. We would appreciate any help. Thank you, Deb
|
|
|
Post by addergran on Sept 9, 2017 12:54:29 GMT 12
Hi Deb, I have a unit that can get rid of the sludge and rubbish in your pool. Depending of where you are the unit is available. It requires a 2in high pressure pump and a 2in suction hose long enough to reach the centre line of the pool. The suction hose is the only part in the pool. You can contact me mobile# 0272359847 Cheers
|
|